CALIBRATION SERVICE OPTIONS    校准服务项目    
FCIFACTORYCALIBRATION CERTIFICATE
A“bare-minimum"certificate that includes a few test points recorded with data for performance of the device at the time of manufacture.                                                    FCI工厂校准证书 最基本的证书，其中包括几个测试点，记录在制造过程中仪表性能的数据。

NISTI"NIST"CERTIFICATEOFCALIBRATION
Acertificate that can be generated at all facilities where measuring and test equipment used in the calibration are typically traceable to the SI(InternationalSystemofUnits)through NIST. NISTINIST可溯源校准证书
本证书在校准中使用的测量和测试设备都可通过NIST溯源到SI(国际单位制)。

ACIISO/IEC17025ACCREDITED CERTIFICATE OF CALIBRATION WITH MEASUREMENTUNCERTAINTIES
Acertificate thatcan only begenerated by selectpersonnel of the Dwyer
InstrumentsInc.-EngineeringLaboratoryin MichiganCity,IN.This certificate is generated byanANABaccreditedinternationallyrecognized laboratoryAll measurements aretraceabletotheSIthrough globally recognized National MetrologyInstitutes(NISTfortheUSetc)
AC|ISO/IEC17025认可的带有测量不确定度的校准证书
本校准证书只能由位于美国MichiganCityIN，Dwver Instruments,LLC工程实验室的指定人员完成。该证书由ANAB认可以及国际认可的实验室提供。所有测量数据都可以通过全球公认的国家计量机构(美国的NIST等)溯源到SI(国际单位制)。

AZIISO/IEC17025ACCREDITED CERTIFICATE OF CALIBRATION WITH MEASUREMENTUNCERTAINTIES TEST UNCERTAINTY RATIOS AND PROBABILITIESOFFALSEACCEPTANCE
ContainsadditionaldatathatsatisfiesrequirementsofmilitarvOMS's.
AZ|ISO/IEC17025认可的带有测量不确定度测试不确定度比和错误接受概率的校准证书
包含额外数据以满足军用QMS要求。